16GB RAM 128GB eMMC Guide Board for Information Point, WF-G3602, AndroidSBC, Rome

TL;DR: 16GB RAM 128GB eMMC Guide Board for Information Point

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-G guide kiosk board family serving Rome, Italy. The WF-G3602 smart guide kiosk Android motherboard spans the wayfinding information kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus eDP, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Rome and Italy importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC, a Wanlin Manufacturing Group export brand, runs the WF-G smart guide kiosk Android motherboard family as a three-track programme. The OEM track puts a partner brand on the board with custom silk print, custom packaging, a custom SKU label and bundled CE / FCC / RoHS files from 100 pieces. The ODM track starts from the reference design and covers schematic review, carrier board changes, custom Android or Linux builds, custom boot animation, pre-installed applications and a private driver SDK from 500 pieces. The distribution track gives Rome and Italy partners regional rights, a channel rebate and a framework agreement with priority allocation. One factory, one firmware baseline, three ways to enter the market. Certification, carton labelling and palletisation for Italy are prepared in Shenzhen by the export desk before the Rome shipment leaves, and the test reports stay versioned against the board revision.

WF-G3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3602 (wayfinding information kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-G family, the WF-G3602-A variant is the typical configuration for the public venue wayfinding and route planning use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Italy Buyers

The second obstacle is touch and display pairing. A guide kiosk is judged on how fast a visitor finds a shop or a gate, and Rome integrators routinely lose weeks calibrating a capacitive or IR panel that the board vendor never validated against the panel model.

The answer is a documented compliance path rather than a promise. AndroidSBC ships the WF-G family with CE, FCC, RoHS and REACH on file and adds AGCOM conformity plus the CE marking with AGCOM radio interface notification file set for Italy, routed through Port of Genoa with the product rather than as a follow-up email. The 2nd booking window for Rome stands at 123600 boards as of September 18, 2026, routed to Italy over the Genoa - Shanghai lane.

Competitive Comparison: WF-G3602 vs Competing Smart Guide Kiosk Android Boards

The shortlist conversation in Rome and Italy rarely turns on clock speed alone. It turns on how quickly a visitor can go from standing in front of a directory to knowing which floor to walk to, and which board vendor has already solved the touch panel, the compliance files and the update path for that moment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Refresh cycles are lengthening, which favours multi-tier families. Analysts covering Italy retail and venue technology report that kiosk and directory estates are being specified for seven to ten years rather than three to five, and Rome programmes are following. That changes the wayfinding information kiosk question from which board is cheapest today to which vendor can still supply the same board, or a documented equivalent, in year eight.

• Mall floor directories and tenant finders: WF-G3602 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G8800 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G8800 and the industrial WF-G8801 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G8801 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC shares the source tables behind these figures with Rome and Italy integrators on request, including the segment splits used for planning.

Partner Success Story: Hanul Venue Services (mall and exhibition service provider)

The Hanul Venue Services case in the Korea commercial venues segment is a working example of how the WF-G family from AndroidSBC supports Rome integrators. Hanul Venue Services installed 123600 WF-G directory and exhibition guide boards across a commercial venue network.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Venue Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.

As Hanul Venue Services Digital Operations Head for Korea Commercial Venues put it: Hanul Venue Services rolled 123600 units into its Italy venue estate because the directory and wayfinding interface on the WF-G board let each Rome site connect floor plans to tenant data without custom firmware work.

Field Report: wayfinding kiosk bank installation at a transit interchange

YANTIAN, Shenzhen, September 18, 2026 - Chu Lin, AndroidSBC field desk. Touch calibration was re-verified across all four corners on every WF-G3602 panel, and the wayfinding information kiosk image was re-flashed once to confirm the OTA staging path. The WF-G3602 smart guide kiosk Android motherboard order for Rome, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-G3602 wayfinding information kiosk production lot includes the WF-G3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Chu Lin, AndroidSBC field desk, YANTIAN, Shenzhen. CE plus AGCOM; family-run chain stores buy smaller batches but with a strong local-cert requirement.

WF-G3602 Application Scenarios

The WF-G3602 wayfinding information kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3602-A configuration is the typical build for the public venue wayfinding and route planning use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3602 plus WF-G3288 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3399 plus WF-G3602 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1330 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G1331 plus WF-G3288 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3399 plus WF-G1331 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3288 plus WF-G1330 carry the guest orientation flow in Rome.
• Exhibition and museum interpretive display points: WF-G3602 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G1331 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Rome: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Rome Buyers

The WF-G family is offered to Rome and Italy partners on three commercial tracks, and the choice is about how much of the product the partner wants to put their own name on.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

All three tracks run on the same twelve-model WF-G family and the same Longgang production line, so Rome partners can move between them without re-qualifying the platform for Italy.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a wayfinding information kiosk?

Answer: Yes. The wayfinding information kiosk is a stock configuration on the WF-G family across the Rockchip premium, mid and legacy tiers and the Allwinner entry and industrial tiers, with capacitive and IR touch, QR, NFC, printer and scanner driver support bundled into the source-factory shipment.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The RK3568 tier in the WF-G family is one of eight. Rockchip RK3588 8nm runs octa-core Cortex-A76 2.4GHz plus Cortex-A55 with the Mali-G610 MP4 GPU and 6 TOPS NPU. RK3568 22nm runs quad-core Cortex-A55 2.0GHz with the Mali-G52 2EE GPU and 1 TOPS NPU, and RK3566 22nm runs the same core at 1.8GHz with 0.8 TOPS. RK3288 28nm is quad-core Cortex-A17 1.8GHz 32-bit with the Mali-T764 GPU, and RK3399 28nm is dual Cortex-A72 plus quad Cortex-A53 with the Mali-T860 MP4. Allwinner A133 and H618 are 22nm and 28nm quad-core Cortex-A53 entry parts, and Allwinner T527 is a 22nm octa-core Cortex-A55 industrial part with the Mali-G57 MC1 GPU and a 2 TOPS NPU.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Italy?

Answer: Yes. AndroidSBC ships the WF-G family with CE, FCC, UKCA, RoHS and REACH documentation, plus AGCOM conformity and the CE marking with AGCOM radio interface notification file set for Italy. The paperwork travels with the Port of Genoa shipment rather than arriving as a follow-up email.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: One board can be ordered as a sample on the WF-G family, shipped in 1-3 days. Private label starts at 100 pieces, custom carrier board work at 500 pieces, and volume production is quoted at 15-30 days from the signed BOM.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC develops custom firmware in-house at the Longgang facility, covering AOSP builds, kernel drivers, boot animation, pre-installed apps and OTA staging logic. The Italy team receives the build tree, not just a binary image.

How are software updates and long-term support handled on the WF-G family?

Answer: Updates are staged, not pushed blind. The WF-G family ships with a staged OTA channel, rollback, remote configuration and device telemetry, so aan Italy estate can be updated site by site and a bad build can be reversed before it reaches the whole fleet.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. For Rome distributors the export desk can route the WF-G lot to a consolidation warehouse or FBA intake, with the AGCOM conformity file and the commercial invoice prepared to the destination requirement in Italy.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes. For the WF-G family AndroidSBC replaces DOA boards from buffer stock and repairs or replaces RMA units in-house, with the failure analysis returned to the Rome integrator so the same fault does not recur on the next lot.

Contact AndroidSBC: Start Your WF-G3602 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G smart guide kiosk Android motherboard family. Rome integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Italy buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.