UL Certified Guide Terminal Board, WF-G3600, AndroidSBC, Rome

TL;DR: UL Certified Guide Terminal Board

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Rome, Italy. The WF-G3600 smart guide kiosk Android motherboard spans the dual-screen smart guide terminal and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual independent HDMI plus LVDS, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Rome and Italy importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Every WF-G smart guide kiosk Android motherboard ships with the compliance set already assembled. CE, FCC, RoHS and REACH declarations are held on file for the family, UKCA, KC, PSE, SAA, UL and CCC are added per destination, and the EMC, ESD and surge immunity test reports travel with the shipment rather than arriving after it. AndroidSBC, a Wanlin Manufacturing Group export brand, keeps the same dossier structure for Italy and for every other market it serves, so a Rome systems integrator can hand the file to a mall operator, a transit authority or a customs broker without a translation round trip. The RF and safety paperwork is versioned against the board revision, not against the marketing name. AndroidSBC keeps buffer stock on the Rockchip and Allwinner tiers so Rome and Italy orders do not wait on a wafer allocation, and each production lot is locked to one BOM for traceability.

WF-G3600 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3600 (dual-screen smart guide terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-G family, the WF-G3600-A variant is the typical configuration for the mall directory and promotion terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Italy Buyers

The seventh obstacle is dual-screen behaviour. Directory and promotion terminals need two independent video paths, and Rome integrators often discover at the site that a board advertised as dual-screen only mirrors the same content to both panels.

Lifecycle is planned at the point of sale. AndroidSBC keeps a seven-year firmware window on the WF-G family, publishes a migration path from the 28nm legacy tiers and the A133 entry tier, and holds buffer stock so Rome and Italy programmes are not stranded when a platform ages out. AGCOM conformity and the CE marking with AGCOM radio interface notification file set stay versioned alongside. As of September 18, 2026 the Rome programme stands at 169300 boards booked, the 2nd lot to clear the line for Italy and the 2nd to route through the Genoa - Shanghai lane.

Competitive Comparison: WF-G3600 vs Competing Smart Guide Kiosk Android Boards

AndroidSBC positions the WF-G family on breadth rather than on a single benchmark number: eight silicon options, twelve models, one driver package and one update channel. That framing is what Rome and Italy procurement teams compare against a two-tier competitor line-up.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Screen estates keep pulling board demand: dual-screen smart guide terminal programmes in Italy are the near-term driver and Rome integrators are quoting against 2026 delivery windows. Grand View Research sized the global interactive kiosk market at USD 34.79 billion in 2024 and models a 7.2% CAGR to USD 52.74 billion by 2030, with hardware holding more than 44% of revenue. The practical read for Rome is that the dual-screen smart guide terminal board is a platform decision that locks in the content stack for the life of the estate.

• Mall floor directories and tenant finders: WF-G3600 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3566 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3566 and the industrial WF-G3288 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3288 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

Two numbers decide aan Italy guide kiosk programme: how many screens a venue actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-G family against both and shares the model with Rome integrators on request.

Partner Success Story: Hanul Venue Services (mall and exhibition service provider)

A recent Hanul Venue Services deployment in the Korea commercial venues segment shows how the WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Rome integrators. Hanul Venue Services installed 169300 WF-G directory and exhibition guide boards across a commercial venue network.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Venue Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.

Hanul Venue Services Digital Operations Head for Korea Commercial Venues highlighted: Hanul Venue Services rolled 169300 units into its Italy venue estate because the directory and wayfinding interface on the WF-G board let each Rome site connect floor plans to tenant data without custom firmware work.

Field Report: directory and promotion terminal deployment at a downtown retail complex

NANSHAN, Shenzhen, September 18, 2026 - Huan Xi, AndroidSBC field desk. Cartons were drop-tested and the WF-G3600 boards re-verified afterwards, with the dual-screen smart guide terminal image and the certification label checked against the shipment manifest for Italy. The WF-G3600 smart guide kiosk Android motherboard order for Rome, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-G3600 dual-screen smart guide terminal production lot includes the WF-G3600-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Huan Xi, AndroidSBC field desk, NANSHAN, Shenzhen. CE plus AGCOM; family-run chain stores buy smaller batches but with a strong local-cert requirement.

WF-G3600 Application Scenarios

The WF-G3600 dual-screen smart guide terminal sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3600-A configuration is the typical build for the mall directory and promotion terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3600 plus WF-G3399 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1330 plus WF-G3600 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1331 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G6180 plus WF-G3399 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1330 plus WF-G6180 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3399 plus WF-G1331 carry the guest orientation flow in Rome.
• Exhibition and museum interpretive display points: WF-G3600 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G6180 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Rome: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Rome Buyers

Entry into the WF-G family is available on three tracks for Rome and Italy buyers, and they are designed so a partner can move between them without re-qualifying the platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

One production line in Longgang serves all three tracks, so a Rome partner who starts on the distribution track and later commissions an ODM design stays on the same Italy supply chain.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen guide terminal?

Answer: Yes. AndroidSBC ships the WF-G family with dual-screen guide terminal as a standard configuration; the Rockchip and Allwinner tiers share one firmware baseline, one driver package and one update channel.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The differences are measurable. RK3588 is 8nm with eight cores, Mali-G610 MP4 and 6 TOPS; RK3568 is 22nm, quad-core A55 2.0GHz, Mali-G52 2EE, 1 TOPS and triple independent output; RK3566 is the same core at 1.8GHz with 0.8 TOPS; RK3288 is a 28nm 32-bit A17 part with the Mali-T764; RK3399 is a 28nm big.LITTLE A72 plus A53 part with the Mali-T860 MP4; T527 is a 22nm octa-core A55 industrial part with 2 TOPS; A133 and H618 are quad-core A53 entry parts. AndroidSBC specifies RK3568 against the workload for Rome.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Italy?

Answer: Yes. For Italy buyers the standard bundle is CE / FCC / RoHS plus AGCOM conformity and CE marking with AGCOM radio interface notification, routed through Port of Genoa. AndroidSBC also keeps the EMC, ESD and surge immunity test reports on file for venue property handover in Rome.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: There is no minimum order to evaluate the WF-G family: a single board ships in 1-3 days. Scaling up, Rome partners move to the OEM track at 100 pieces or the ODM track at 500 pieces, with a 15-30 day production window.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. The ODM track covers AOSP and Linux BSP porting, custom boot animation, custom launcher, pre-installed content clients and driver work. Rome integrators get a versioned build they can pin rather than a vendor image that changes without notice.

How are software updates and long-term support handled on the WF-G family?

Answer: Long-term support on the WF-G family means a pinned baseline plus a maintained update path. Italy operators can stay on their validated build for years and still receive security patches, because AndroidSBC keeps the branch alive rather than forcing a platform migration.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC supports FOB Shenzhen, CIF Port of Genoa and DDP delivery into Amazon FBA or a consolidation warehouse, with serialised carton labels and the AGCOM dossier bundled for Italy.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: The RMA path is direct. Italy partners lodge the unit with the export desk, replacement boards come from Shenzhen buffer stock for DOA cases, and repaired or replaced units are returned on the agreed lane to Rome.

Contact AndroidSBC: Start Your WF-G3600 Sourcing Conversation

For the WF-G smart guide kiosk Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Rome integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Italy buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-G family.