POS Board 4GB LPDDR5 for Restaurant Till, WF-P7601, AndroidSBC, Rome

TL;DR: POS Board 4GB LPDDR5 for Restaurant Till

AndroidSBC peripheral desk: printer, scanner, cash drawer and payment reader driver SDK declared production-ready serving Rome, Italy. The WF-P7601 POS Android motherboard spans the AI face payment POS terminal with 3D camera input and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, MIPI DSI plus HDMI output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Rome and Italy importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

For Rome integrators the WF-P family answers the question that usually blocks a rollout: will the board drive both the cashier screen and the customer display, and will the cash drawer fire on the right pulse. AndroidSBC ships the dual-screen configuration, the RJ11 or RJ12 drawer header and the printer handshake as a validated set, not as a list of interfaces on a datasheet. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Rome partner can trace a single board back to its run.

WF-P7601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7601 (AI face payment POS terminal with 3D camera input) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-P family, the WF-P7601-A variant is the typical configuration for the face payment counter deployment use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Italy Buyers

Dual-screen POS is where most competing boards fail quietly. They list two display interfaces, but the second lane is a mirror rather than an independent framebuffer, so the customer display cannot carry a separate promotion loop.

The fiscal layer is handled in firmware. Receipt templates, log retention and the fiscal printer handshake are configured before shipment, and the Port of Genoa lane is booked against a production slot so the Rome pilot batch lands inside the store opening window. AndroidSBC logged the 2nd shipment to Rome on September 23, 2026 - 59700 boards on the Genoa - Shanghai lane, each serialised against its burn-in record and each carrying the same firmware baseline.

Competitive Comparison: WF-P7601 vs Competing POS Android Boards

Against the boards Rome integrators are currently offered, the WF-P family is differentiated on four points that a checkout lane actually feels.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Within the Italy market the fastest-moving segment is the smart Android terminal that replaces a cash register outright. The AI face payment POS terminal with 3D camera input sits directly in that segment: a merchant is not buying a card reader, they are buying the counter.

• Entry counter tier: WF-P7601 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3288 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3399 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

What a Rome integrator should take from the forecasts is that the second and third batches matter more than the first. The WF-P family is specified so the second batch is the same board.

Partner Success Story: Hanul Counter Systems (franchise chain POS integrator)

A Hanul Counter Systems programme in the Korean franchise retail segment illustrates how the WF-P family from AndroidSBC supports Rome integrators on the ground. Hanul Counter Systems rolled out 59700 WF-P boards across 88 franchise counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Counter Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.

As Hanul Counter Systems Head of Retail Platforms for Korean Franchise Retail explained: Hanul Counter Systems chose the WF-P family for the barcode engine performance against local GS1 prefixes, with 59700 boards released into the Rome franchise group.

Field Report: face payment counter deployment across a convenience chain

BAOLONG, September 23, 2026 - Ke Xin, AndroidSBC field desk. For the AI face payment POS terminal with 3D camera input brief the WF-P7601 was configured with the barcode scanner on USB and the printer on RS232, the combination the Italy partner runs in production. The WF-P7601 POS Android motherboard order for Rome, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-P7601 AI face payment POS terminal with 3D camera input production lot includes the WF-P7601-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Ke Xin, AndroidSBC field desk, BAOLONG. Italian buyers require the RT fiscal printer handshake documented, plus Italian VAT wording on the receipt template.

WF-P7601 Application Scenarios

The WF-P7601 AI face payment POS terminal with 3D camera input sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7601-A configuration is the typical build for the face payment counter deployment use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P7601 drives the cashier screen while the second lane carries the customer display or the promotion wall in Rome.
• Convenience and small format stores: the WF-P1330 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P6180 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P5270 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Rome: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Rome Buyers

The WF-P family is offered on distribution, integration or private-label terms, and a Rome partner can run more than one at a time.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whichever track aan Italy partner starts on, the technical deliverable is identical - the same board, the same driver set and the same compliance pack.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support an AI face payment POS terminal with 3D camera input?

Answer: Yes. The AI face payment POS terminal with 3D camera input is a stock configuration on the WF-P POS Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Rome.

Which silicon tiers are available in the WF-P family for Italy buyers?

Answer: RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 are all in production. The RK3576 tier specified here is validated for Italy compliance with the same evidence pack as the rest.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes, and the configuration is documented per lot. The Rome partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.

What is the minimum order quantity and the sample lead time for Italy?

Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Rome partner reference image.

How are firmware updates delivered to aan Italy estate after deployment?

Answer: Updates go out through the staged OTA channel bundled with the driver SDK. The Rome partner can hold lanes, pilot on ten, and revert any wave that misbehaves.

What shipping terms does AndroidSBC support for Italy orders?

Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Rome partner chooses the Incoterm that matches its broker arrangement.

What happens if a board fails in the field in Italy?

Answer: AndroidSBC holds service stock for Rome partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.

Contact AndroidSBC: Start Your WF-P7601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Rome integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Rome and Italy buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.